F-Min Sw; Release Button - Nikon VBA23001 Repair Manual

F-min SW

・Solder the wires (Black/Red). Solder the wires (Black/Red).
・Mount the F-min SW B (#134) by fitting with bosses of the F-min SW unit (#B133). Mount the F-min SW B (#134) by fitting with bosses of the F-min SW unit (#B133).
(The contact brush of [#134] must be placed on inside of [#B133] as below.) (The contact brush of [#134] must be placed on inside of [#B133] as below.) The contact brush of [#134] must be placed on inside of [#B133] as below.) [#134] must be placed on inside of [#B133] as below.)
・Tighten the screw (#642). Tighten the screw (#642).
Wire ×2 (Black/Red)
F-min SW B (#134)
Screw (#642)

Release button

Release button
・Mount the A/M change cam (#122). Mount the A/M change cam (#122).
・Attach the release button holder (#B116). Attach the release button holder (#B116).
must be placed on inside of [#B133] as below.)
F-min SW unit (#B133)
A/M change cam (#122)
Release button holder (#B116)
- A5 ･ D90 -
#B133] as below.)
Grease: LEN317A
INC
VBA23001-R.3762.A