Nikon VBA23001 Repair Manual page 98

・Fold down the FPC of the lens contact unit (#B2113) toward the bayonet side by fitting with the bosses.
・Make the three solder bridges. Make the three solder bridges.
・Solder the wires (Black/Yellow) of the A/M change SW unit. Solder the wires (Black/Yellow) of the A/M change SW unit.
・Solder the wires (Black/Yellow) of the AF driving base (Black/Yellow). Solder the wires (Black/Yellow) of the AF driving base (Black/Yellow).
#B2113
Wire ×2 (Yellow/Black) of the A/M change SW unit
・Solder the wires (Red/Black) of the Fmin-SW. Solder the wires (Red/Black) of the Fmin-SW.
lens contact unit (#B2113) toward the bayonet side by fitting with the bosses. toward the bayonet side by fitting with the bosses.
Wire ×2 (Yellow/Black) of the AF driving base
Wire ×2 (Red/Black)
- A16 ･ D90 -
INC
VBA23001-R.3762.A