Grip Rubber Unit - Nikon VBA23001 Repair Manual

Grip rubber unit

・Take out the screws (#627 and #618). Take out the screws (#627 and #618).
・Remove the grip rubber unit (#B26). Remove the grip rubber unit (#B26).
・Peel off the tape [TA0005 (3.3 Peel off the tape [TA0005 (3.3×11)].
・Peel off the tape (#811). Peel off the tape (#811).
・Remove the plate (#388). Remove the plate (#388).
・Remove the button (#390) and the conducting rubber (#389). Remove the button (#390) and the conducting rubber (#389).
・Attach the spring (#161) from behind, and take out the screw (#638). spring (#161) from behind, and take out the screw (#638).
・Remove the grip red mold (#29) from the front side of the grip cover. grip red mold (#29) from the front side of the grip cover.
Tape (#811)
Screw (#638)
Spring (#161)
Grip red mold (#29)
Battery chamber
Screw (#618)
from the front side of the grip cover.
Plate (#388)
Conducting rubber (#389)
Grip cover
- D17 ･ D90 -
Screw (#627)
Button (#390)
Grip rubber unit (#B26)
Tape [TA0005 (3.3×11)]
INC
VBA23001-R.3762 .A