3.Click "OK". Program will start.
4. To display in Japanese, select the radio button of "Japanese" in "Language" at the lower right corner of
the screen. However, the screen will not be displayed correctly by English OS.
5.To end the program, click "Close (×)" button at the top right hand corner of the screen or click "Quit".
※ When the camera body (excluding imaging) is inspected and adjusted, the USB connection will be reset in
the process of writing the data into the camera. Therefore, the following message will appear but does not
affect the adjustment. Click "Cancel", and proceed with the next.
- A83 ・ D90 -
INC
VBA23001-R.3762.A