Nikon VBA23001 Repair Manual page 91

・Adhere the flocked sheet (#816). Adhere the flocked sheet (#816).
・Attache the three bayonet springs (#112) and the GND plate (#136). Attache the three bayonet springs (#112) and the GND plate (#136).
・ Mount the bayonet mount (#111). Tighten the one screw (#660) and the five screws (#648) in numeric order ( ①→⑥） . Mount the bayonet mount (#111). Tighten the one screw (#660) and the five screws (#648) in numeric order ( ①→⑥） .
・Attach the gasket (#482) so that it is not placed on the mount. gasket (#482) so that it is not placed on the mount.
Gasket [#482]
④
Screw [#648] ×5
Screw [#660] ×1
⑥
GND plate (#136)
Bayonet spring (#112) ×3
Bayonet mount [#111]
②
⑤
③
①
- A9 ･ D90 -
INC
VBA23001-R.3762.A
Flocked sheet (#816)
Grease: LEN317A
#112×3
→⑥） .
Grease: LEN-317A
⑥） . ） . .