Motor Speed Low Limit (Rpm; Hz); Motor Speed High Limit (Rpm); Motor Speed High Limit (Hz); Jog Speed (Rpm) - Trane TR200 Instruction Manual

4-11 Motor Speed Low Limit [RPM]
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
4-12 Motor Speed Low Limit [Hz]
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
4-13 Motor Speed High Limit [RPM]
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
Max. output frequency cannot exceed 10% of the inverter switching frequency (par. 14-01
Any changes in par. 4-13 Motor Speed High Limit [RPM]
same value as set in par. 4-13
4-14 Motor Speed High Limit [Hz]
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
NOTE
Max. output frequency cannot exceed 10% of the inverter switching frequency (par. 14-01
3-19 Jog Speed [RPM]
Range:
Applica- [Application dependant]
tion de-
pend-
ent*
BAS-SVX19C-EN
Function:
Enter the minimum limit for motor speed. The Motor Speed Low Limit
can be set to correspond to the manufacturer's recommended minimum
motor speed. The Motor Speed Low Limit must not exceed the setting in
par. 4-13 Motor Speed High Limit
Function:
Enter the minimum limit for motor speed. The Motor Speed Low Limit
can be set to correspond to the minimum output frequency of the motor
shaft. The Speed Low Limit must not exceed the setting in
par. 4-14 Motor Speed High Limit
Function:
Enter the maximum limit for motor speed. The Motor Speed High Limit
can be set to correspond to the manufacturer's maximum rated motor.
The Motor Speed High Limit must exceed the setting in par. 4-11
Speed Low Limit
par. 4-12 Motor Speed Low Limit [Hz]
other parameters in the Main Menu and depending on default settings
dependant on global location.
Motor Speed High Limit [RPM].
Function:
Enter the maximum limit for motor speed. The Motor Speed High Limit
can be set to correspond to the manufacturer's recommended maximum
of the motor shaft. The Motor Speed High Limit must exceed the in
par. 4-12 Motor Speed Low Limit
Limit [RPM] or par. 4-12
depending on other parameters in the Main Menu and depending on
default settings dependant on global location.
Function:
Enter a value for the jog speed n
frequency converter runs at this speed when the jog function is activated.
The maximum limit is defined in par. .
See also par. 3-80
How to program the Frequency Converter
[RPM].
[Hz].
[RPM]. Only par. 4-11 Motor Speed Low Limit [RPM]
will be displayed depending on
will reset the value in par. 4-53
[Hz]. Only par. 4-11
Motor Speed Low Limit [Hz]
, which is a fixed output speed. The
JOG
Jog Ramp Time.
Motor
Switching Frequency).
Warning Speed High to the
Motor Speed Low
will be displayed
Switching Frequency).
6-7
or