Motor Connection For C1 And C2; Motor Connection For C3 And C4 - Trane TR200 Instruction Manual

Electrical Installation

Motor Connection for C1 and C2

First terminate the motor earth, then Place motor U, V and W wires in terminal and tighten. Please ensure that
the outer insulation of the motor cable is removed under the EMC clamp.

Motor Connection for C3 and C4

First terminate the motor earth, then place motor U, V and W wires into the appropriate terminals and tighten.
Please ensure that the outer insulation of the motor cable is removed under the EMC clamp.
4-24 BAS-SVX19C-EN