Step 1. Connect Gas Supply
Firmly grasp the S/S flexi pipe
then attach pipe to gas control valve and tighten.
B
Step 2. Leak Testing
Turn gas back ON and leak test appliance connection.
Use a soapy solution to test all gas connections. If a leak is present bubbles will form at the leak
point. when finished remove any residue with a rag. Prevent any soapy solution from coming in
CAUTION
contact with electrical components.
Proceed to "BURNER MEDIA INSTALLATION" on page 38.
Rinnai
CONNECTING GAS
and bend at 90° approximately mid way to line up with the gas control valve inlet
A
B
A
37
B
A
SAPPHIRE RIB2312 OIM