Storage Procedure - Ricoh Type 480 Scanner Reference

Storing Files

Storage Procedure

You can scan and store files.
A A A A
Press the { { { { Scanner} } } } key.
4
Note
❒ The illustration is an example.
The actual appearance may be
different.
B B B B
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the { { { { Clear Modes} } } } key.
C C C C
Make settings for the original, such
as orientation and output tray.
Reference
p.75 "Specifying the Orienta-
tion and Output Tray of the
Original"
D D D D
Make the scan settings.
Reference
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
scanning. For details, see
p.73 "Specifying Scan Set-
tings".
• Recall registered settings. For
details, see p.80 "Programs".
44
E E E E
Make the settings for storing scan
files.
A Press [Store File].
B Press [Store Only].
ZZZ606S
Note
❒ To store and deliver scan
files, press [Send & Store]. See
p.28 "Simultaneous Storage
and Sending by E-mail", p.41
"Simultaneous Storage and
Sending by Scan to Folder",
or p.65 "Simultaneous Stor-
age and Delivery".
❒ [Store Only] cannot be pressed
if a destination or sender is
selected.
C Press [OK].
F F F F
Specify file information.
Specify a user name, file name, and
password for the file.
Reference
For details about specifying file
information, see p.45 "Specify-
ing file information".
G G G G
Place originals.