Table of Contents
Advertisement
Message
Connection with LDAP server has
failed. Check the server status.
Connection with the destination has
failed. Check the status and connec-
tion. To check the current status,
press [Scanned Files Status].
Entered protection code for destina-
tion is incorrect. Please re-enter.
Exceeded max. data capacity. Original
Orientation to
Start key again.
Exceeded max. E-mail size. Sending E-
mail has been cancelled. Check [Max.
E-mail Size] in Scanner Features.
Exceeded max. file capacity. Delete
the unnecessary stored files.
Exceeded max. No. of search results
which can be displayed.
Max.: nnn
Note
❒ "nnn" in the message represents a changeable
number.
, then press the
When a Message Is Displayed
Causes and solutions
A network error has occurred and
connection has failed. Try the opera-
tion once more. If the message is still
shown, the network may be crowd-
ed. Check the information of System
Settings. See "User Tools (System
Settings)", General Settings Guide.
• Check the network settings of the
client computer.
• Check that components such as
the LAN cable are connected
properly.
• Check that the server settings are
correct and the server is working
properly.
Make sure the protection code is cor-
rect, and then enter it again. See
"Registering a Protection Code",
General Settings Guide.
• Reload the original in the orienta-
tion of
.
• If you select an original loading
orientation other than
machine may not be able to scan
the original with high resolution.
seep.105 "Relationship between
Resolution and original size".
• Increase the size of [Max. E-mail Size].
• Set [Divide & Send E-mail] to [Yes
(per page)] or [Yes (per max. size)].
See p.101 "Send Settings".
For details about the maximum
number of files that can be stored,
see p.114 "Store". Reduce the
number of stored files for transmis-
sion or delete unnecessary stored
files.
Search again after changing the
search conditions.
, the
8
87
Advertisement
Table of Contents
