Ricoh Type 480 Scanner Reference page 69

Note
❒ The destination list is updated
automatically.
❒ Depending on the security set-
tings, certain destinations may
not be displayed.
Selecting a destination from the
list
A Select the destination.
The selected destination is high-
lighted and also is displayed in
the destination field at the top of
the screen.
Note
❒ If the target destination does
not appear, take one of the
following steps:
• Display the destination by
selecting its initial letter
from the title.
• Display the destination by
pressing [U U U U ] or [T T T T ].
❒ The destination titles are pro-
gramed in the delivery serv-
er.
❒ To deselect a destination,
press the destination once
more, or press [U U U U Prev.] or
[T T T T Next] to display the desti-
nation in the destination
field, and then press the
{ { { { Clear/Stop} } } } key.
B To select more destinations, re-
peat step A A A A .
Using a registration number to
select a destination
A Press [Registration No.].
B Enter the five digit registration
number that has been assigned
to a destination folder using
the number keys.
If the entered number is less
than five digits, press the { { { { #} } } }
key after the last number.
Example: To enter 00009
Press the { { { { 9} } } } key, and then
press the { { { { #} } } } key.
Note
❒ To deselect a destination, press
[U U U U Prev.] or [T T T T Next] to display
the destination in the desti-
nation field, and then press
the { { { { Clear/Stop} } } } key.
C To select more destinations, re-
peat step B B B B .
Searching for a destination
A Press [
].
Delivering Scan Files
61
5