Simultaneous Storage And Delivery - Ricoh Type 480 Scanner Reference

The procedure to specify the sub-
ject name "[Urgent] New product
appearance" is explained as an ex-
ample here.
A Press [Attach Subject].
B Press the subject [Urgent].
C Press [Manual Input].
The soft keyboard appears.
D Enter the subject "New prod-
uct appearance".
E Press [OK] twice.
J J J J
Place originals.
Reference
The procedure for placing origi-
nals is the same as that for plac-
ing originals for copying. For
details about placing originals,
see "Placing Originals", Copy
Reference.
Note
❒ To interrupt scanning, press the
{ { { { Clear/Stop} } } } key or press [Stop]
on the display panel.
❒ When scanning multiple pages
into a single file, place the next
original. For details, see p.77
"Scanning Multiple Pages into a
Single File".
Simultaneous Storage and
Delivery
You can use the network delivery
scanner function and the storage
function together.
The scan file is delivered and at the
same time is stored.
Note
❒ This section explains mainly the
procedure for simultaneous deliv-
ery and storage. For details, see
p.60 "Delivering Scan Files".
A A A A
Make settings for the original,
such as orientation and output
tray.
Reference
p.75 "Specifying the Orienta-
tion and Output Tray of the
Original"
B B B B
Make the scan settings.
Note
❒ There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
scanning. For details, see
p.73 "Specifying Scan Set-
tings".
• Recall registered settings. For
details, see p.80 "Programs".
C C C C
Select the destination.
D D D D
Specify the sender and a subject if
necessary.
Delivering Scan Files
65
5