Clearing The Maintenance Condition - Ricoh AP1400/AP2000 Operating Instructions Manual

Clearing the Maintenance Condition

After replacing all of the parts, follow
the steps below to clear the "Replace
Maintenance Kit" message on the
panel display.
A
Make sure the following message
appears on the panel display.
Replace
Maintenance Kit
B
Press { { { { Menu} } } } .
The following message appears on
the panel display.
Main Menu:
Job Control
C
Press { { { { U U U U } } } } { { { { T T T T } } } } until the following
message appears on the panel dis-
play.
Main Menu:
Maintenance
D
Press { { { { Enter} } } } .
The following message appears on
the panel display.
Maintenance:
1.System Reset l
E
Press { { { { T T T T } } } } until the following
message appears on the panel dis-
play.
Maintenance:
4.PM Clear
F
Press { { { { Enter} } } } .
The following message appears on
the panel display.
PM Clear:
Yes=#
G
Press { { { { Enter} } } } to clear the mainte-
nance condition. Wait for a while.
The following message appears on
the panel display after about three
seconds.
Maintenance:
4.PM Clear
j
H
Press { { { { On Line} } } } .
l
The following message appears on
the panel display.
Ready
j
l
j
j
l
Clearing the Maintenance Condition
j
l
2
j
l
13