Ricoh AP1400/AP2000 Operating Instructions Manual page 107

F
Pinching the side guides, slide
them against the edge of the enve-
lope stack.
G
Pinching the rear guide, slide it
against the edge of the envelope
stack.
H
While lifting the front side of the
tray, place it into the printer. Then
slide it until it stops.
I
Specify the envelope size and
feed direction using the operation
panel as follows.
A Press {Menu}
The following message appears.
Main Menu:
Job Control
B Press {Enter}.
The following message appears.
Type 1 Printer: Loading Paper and Other Media
Job Control:
1.Paper Input
C Press {Enter}.
D Press {U}{T} until the follow-
ing message appears.
Paper Input:
3.Paper Size
E Press {Enter}.
The following message appears.
TS3Y351E
Paper Size:
3.Tray 2
F Press {Enter}.
G Using {U}{T}, select the enve-
lope type you want to use.
Reference
For information on types of
envelopes you can select, see
P.65 "Paper and Other Media
Supported by Your Printer".
H Press {Enter}.
TS3Y361E
I After the panel display chang-
es, press {On Line}.
The panel display returns to the
ready condition as follows:
Ready
J
Start the print operation with
your computer.
j
l
j
l
j
l
j
l
9
87