Ricoh AP1400/AP2000 Operating Instructions Manual page 307

Refer to online help for additional information about the fields on this screen.
A
In the Port 1 screen, double-click on an item in the Users/Groups Notified
by Printer field.
The Notify Settings screen appears.
Use this screen to set up the notify function for a user or group.
User/Group name
This is the name of the current user/group.
This is a read only field.
Delay in seconds for first message
Indicates how long the NIB should wait before sending a notification mes-
sage that an error condition has been detected.
Delay in seconds for repeat messages
Indicates how long the NIB should wait before sending a repeat notifica-
tion of an error condition.
Note
The NIB supports notify function only in Bindery Mode.
B
Click on [OK] to apply these settings.
Return to the Port 1 screen.
C
Click on [Next] to Continue.
The Setup Complete screen appears.
D
Click on [Finish] to apply and save the configuration settings.
NWSetup:NetWare Print Server Configuration
2
11