Paper and Other Media
Paper weight and number of sheets to be set
Standard Tray
Paper Feed Unit (DLT) Type 2000
(option)
Paper Feed Unit (A3) Type 2000
(option)
Paper Feed Unit (LT) Type 2000
(option)
Paper Feed Unit (A4) Type 2000
(option)
Bypass Tray
Envelope Feeder Type 2000
*1
Make sure that the top of the stack is not higher than the limit mark indicated on the
side fence of the tray.
*2
The envelope feeder requires the installation of the optional paper feed unit.
Type 2 Printer
Note
Please refer to the inside of the front cover of this manual to confirm which
printer (Type 1 Printer or Type 2 Printer) you have.
9
Important
Be sure to set the paper size dial to match the actual paper size loaded in the
tray.
For Tray 1 and 2, the dial setting overrides the setting made with the opera-
tion panel.
The envelope feeder requires the installation of the optional paper unit.
The envelope feeder can be exchanged only with the Tray 2.
Note
The supported paper size varies somewhat depending on the memory size of
your printer.
Regarding the meanings of the abbreviations, see the notes at the bottom of
each table.
70
Supported paper
weight
60 - 90 g/m
60 - 90 g/m
60 - 90 g/m
60 - 162 g/m
P.74 "Paper types and cautions"
*2
P.141 "Memory Capacity and Paper Size"
Maximum number of
sheets (plain paper)
2
(16 - 24 lb)
250 (80 g/m
2
(16 - 24 lb)
500 (80 g/m
2
(16 - 24 lb)
500 (80 g/m
2
(16 - 42 lb) 100 (80 g/m
For other kind of papers,
P.74 "Paper types and
cautions".
*1
2
, 20 lb)
2
, 20 lb)
2
, 20 lb)
2
, 20 lb)