Windows 3.1X - Installing The Pcl 6/5E Printer Driver - Ricoh AP1400/AP2000 Operating Instructions Manual

Installing the PCL 6/5e Printer Driver
K
Select the file titled [SETUP.EXE].
L
Click [Open].
M
Click [OK].
N
Follow the instructions on the screen.
O
If you are asked if you want to restart Windows, select [Yes]. If you are not
asked, restart Windows after completing the installation.
P
Click [Start] on the task bar, point to [Settings], and then click [Printers].
The [Printers] window appears.
Q
Select the icon of the printer you installed by clicking it.
R
On the [File] menu, click [Properties].
S
On the [General] tab, click [Print Test Page].
5
Important
If your printer is equipped with certain options (ex. paper feed unit or
memory unit), you should set up the options with the printer driver.
Setting up options
A
Click [Start] on the task bar, point to [Settings], and then click [Printers].
The [Printers] window appears.
B
Select the icon of the printer you want to use by clicking it.
C
On the [File] menu, click [Properties].
The Printer Properties appears.
D
Click the [Accessories] tab.
E
Set up any options you have installed on your printer.
F
Click [OK].

Windows 3.1x - Installing the PCL 6/5e Printer Driver

Installing the printer driver
Follow these steps to install the PCL 6/5e printer driver on your Windows 3.1x
system:
32