Ricoh AP1400/AP2000 Operating Instructions Manual page 150

Making Printer Settings with the Operation Panel
Paper Input
Menu
Paper Size
Thick Paper
11
130
2
/
2
Description
You should specify the paper size for the bypass tray, op-
tional envelope feeder, and for those not indicated on the
paper size dials of the Tray 1, Tray 2 and Tray3.
When you specify the sizes that are not indicated on the pa-
per size dial of Tray 1, Tray 2, or Tray 3, you should set the
dial to "p" and then specify the paper size here.
The dial settings override settings made here.
Bypass Tray
For information on paper sizes that can be set in the by-
pass tray, see P.65 "Paper and Other Media Supported by
Your Printer".
Tray1
For information on paper sizes that can be set in Tray 1,
see P.65 "Paper and Other Media Supported by Your Print-
er".
Tray 2 (option)
For information on paper sizes that can be set in Tray2,
see P.65 "Paper and Other Media Supported by Your Print-
er".
Note
When the optional envelope feeder is not installed,
you should not specify the size for envelopes.
Tray 3 (option, Type 1 Printer only)
For information on paper sizes that can be set in Tray 3,
see P.65 "Paper and Other Media Supported by Your Print-
er".
You can enhance the image quality for printing on thick pa-
per. When the toner is not fused enough, set this feature to
"On". If the image is blurred, set it to "----" .
• Off
• On
• ----
Note
Default: Off
You don't have to set this feature to "On" or "----" every
time you use thick paper. Try printing with this feature
off, and if you want to enhance the image quality, adjust
it using this feature.