Ricoh AP1400/AP2000 Operating Instructions Manual page 119

Messages
Load Bypass Tray
{paper size}
Description
There is no paper on the by-
pass tray.
The actual size of paper
loaded on the bypass tray
does not match the size for
which the page was built.
Error & Status Messages on the Operation Panel
Comments
Load {paper size} paper in the
specified feed direction onto the
bypass tray. Printing will not au-
tomatically resume if the paper
size and direction setting is incor-
rect. There are 2 methods to re-
sume printing.
A
Use the operation panel to set
the correct size and direction
of the paper in the bypass
P.130 "Paper Input 2/
tray.
2"
Press {Enter} to have printing
B
begin, regardless of the size
and direction of the paper in
the bypass tray.
Note
When "Auto Select" is speci-
fied for the paper source using
the printer driver, this mes-
sage might appear when there
is {paper size} paper in a dif-
ferent feed direction in any of
the trays.
The page is printed in the in-
correct format on the paper
loaded on the bypass tray in
the following cases.
• if you press {Enter} before
loading the correct paper.
• if the specified period of
time has passed with the
Auto Continue feature on.
In these cases, you can't
continue printing due to
the paper size error. You
should take one of the fol-
lowing actions to clear this
error:
• Press {Enter}. (Auto
Continue feature
doesn't work with this
error.)
• Open and close any of
the trays.
10
99