Replacing The Paper Feed Rollers - Ricoh AP1400/AP2000 Operating Instructions Manual

Replacing the Paper Feed Rollers

R CAUTION:
• When lifting the machine, use
the inset grips on both sides of
the machine. Otherwise, the ma-
chine might fall and cause per-
sonal injury.
A
Move the printer to the edge of a
sturdy and stable table or desk.
Important
Do not put the printer on an un-
stable or tilted surface.
Note
If the optional paper feed unit is
equipped with your printer, do
not move the printer and the
unit together as they are not se-
curely attached.
B
When looking inside where the
paper tray was installed, you can
see the paper feed roller. Slide the
green lock lever to the right (A A A A ),
so that the paper feed roller will
be released (B B B B ).
1
C
Set the new paper feed roller.
While sliding the green lock lever
to the right (A A A A ), set the new roller
(B B B B ). After that, return the green
lock lever to its original position
(C C C C ).
TS3M130E
2
Note
Confirm that the green lock le-
ver secures the roller correctly
by checking if the new roller ro-
tates smoothly.
D
If your printer is equipped with
the optional paper feed unit(s),
follow the same procedure to re-
place the paper feed roller of the
optional paper feed unit(s).
E
Leave the paper tray pulled out
and go to P.8 "Replacing the
Transfer Roller".
Replacing the Paper Feed Rollers
1
3
2
2
TS3M140E
TS3M150E
7