Ricoh AP1400/AP2000 Operating Instructions Manual page 244

Print Server Name
Print Queue Scan Rate
Print Server Password
and Print Server
Password Retype
Ethernet Frame Type
Below is an example of the second Print Server Settings screen.
Field
Enable NDS Mode
Preferred NDS Context
Indicates the NetWare print server name which the Network
Interface Board uses to log into NetWare. You can enter a name
which does not already exist in the network directory or server
bindery. The maximum field length is 48 characters.
Specifies the rate at which a Network Interface board
will poll print queues for a new print job.
For example, if you place 1 in the field, the Network
Interface Board should poll for new print jobs every 1
second.
The minimum value for this field is 1 and the maximum
is 250.
Indicates the password for a Network Interface Board which will be
used to log into NetWare. When you change this field, NWSetup
will set the password in both NetWare and the Network Interface
Board.
The maximum length for this field is 32 characters. Both the
Password and Password Retype fields must be identical before a
user is allowed to Finish this screen.
Indicates the Ethernet frame type that should be used by the
NetWare protocol stack by default. Only one frame type can be
selected.
Description
Indicates whether the Network Interface Board support Directory
Services. When the box is checked, Directory Services is
supported.
If this box is not checked, then all other fields on this screen will
not be enabled.
Enter a text string to set the NDS directory context for which the
Network Interface Board will use to login to the network. The
Chapter 4 - 15