Ricoh AP1400/AP2000 Operating Instructions Manual page 243

Once you select the Network Interface Board you want to configure, the Print Server Settings
screen appears. This screen lets you set up your version of Novell NetWare for the Network
Interface Board. See 4.6.3.2 Setup Novell NetWare.
4.6.3.2 Setup Novell NetWare
The Print Server Settings screens are shown below. There are two Print Server Settings
screens, which you need to complete to configure the Network Interface Board for Novell
NetWare.
Each screen lets you set up your version of Novell NetWare for the Network Interface Board,
including directory and bindery services. A description of the fields immediately follows each
screen example.
Enable NetWare
Print Server
Chapter 4 - 14
Field
Indicates whether the NetWare Network Interface Board has been
enabled.
Description
If the box is not checked, the Network Interface Board has not been
enabled for NetWare. All other fields on the screen will be shaded.
If the box is checked, the Network Interface Board has been enabled for
NetWare and you can make entries in the other fields.