Ricoh Aficio 1050 System Settings page 702

Connect Copy (Option)
Note
You can enter up to 9999 copies.
If you make a mistake, press the {Clear} key and enter a new number.
Even though Connect Copy is selected, only the master unit will make cop-
ies in the following situations :
• When making a single copy set.
• When the original is a single sheet and you enter a low number of cop-
ies/sets.
F
Press the {Start} key on the master unit.
Copying starts after the original has been scanned.
Note
4
If you have set your originals in the document feeder (ADF), copying starts
simultaneously in the master unit and sub-unit after all originals have been
scanned.
When using the Batch (SADF) mode, set your originals and press the
{Start} key. After all the previously set originals are scanned in, set the next
originals while the Auto Feed indicator is lit. When all pages have been
scanned in, press the {#} key. Copying starts simultaneously in the master
unit and sub-unit. See "Batch SADF mode".
When scanning from the exposure glass, set the next page(s) when scan-
ning has finished, then press the {Start} key. When all pages have been
scanned in, press the {#} key. Copying starts simultaneously in the master
unit and sub-unit.
To stop originals being scanned or copied, press the {Stop} key on the mas-
ter unit and follow the instructions on the display, press the [Yes] key.
G
Pick up your copies from the master unit and sub-unit.
Note
The number of copy sets made by the master unit and sub-unit may differ.
The master unit and sub-unit may not finish copying exactly at the same
time.
When using the Sort/Staple function, copies are organized into copy sets.
If there is a paper misfeed in one machine during this process, it is not pos-
sible for the other machine to take over the copy set processing of the non
functional machine.
When using Document Server functions, only the master unit will make
copies by the combination of the features.
252
P.32 "Batch (SADF) mode"