C
Set your originals in the master unit.
Originals
Set in the
document
feeder
R
R
R
R
Reference
See
P.26 "Setting Originals".
D
Make any settings you require on the master unit.
Note
Any copy settings that were set up before you entered Connect Copy mode
will still remain in effect. The Punch function requires the optional Punch
kit to be installed on both the master and sub-unit.
To exit Connect Copy mode, press the [Connect] key on the master unit
again.
E
Enter the number of copies you require with the number keys.
Set on the
exposure
glass
set1EE
set2EE
Using Connect Copy
251
4