Size - Ricoh Aficio 1050 System Settings

What to do if Something Goes Wrong
Machine Status
The number of sheets that
can be stapled has been ex-
ceeded.
The machine cannot staple
this size paper.
This paper is not available
in Duplex mode.
You cannot enter the de-
sired copy set number.
5
Document Server
Problem
"Exceeded max. disk memory (50 files)."
is displayed.
"Insufficient memory. The selected file
cannot be transmitted." is displayed.
"Cannot recognize" is displayed.
"The selected file(s) currently in use." is
displayed.
266
Problem/Cause
--
--
A paper size not available
in Duplex mode has been
selected.
The number of copies ex-
ceeds the maximum copy
quantity.
Action
The maximum number of files you can
store is 250 in the HDD, 50 files in the CD-
R/RW (option). Delete any unnecessary
files and then scan the document again.
Delete any unnecessary files and then
scan the document again. See
"Document Server"
Change the Memory Allocation. See
"Memory Allocation" in the System Set-
tings manual. However if you change this
setting, the documents in the HDD will be
deleted. Print the stored documents in the
HDD.
Change the disk in the CD-R/RW. The
disk must be unformatted one that has al-
ready been used in this machine.
Make sure the selected file is not using in
document server or document editor
function.
Action
Check the stapler capacity.
See P.49 "Staple".
Select a paper size that can
be used in Staple mode.
See P.49 "Staple"
Select a paper size that can
be used in Duplex mode.
See P.84 "Duplex"
You can change the maxi-
mum copy quantity. See "
Maximum Copy Quanti-
ty" P.314 "General Fea-
tures".
P.332