Ricoh Aficio 1050 System Settings page 485

A
Do one of the following:
To have image density selected automatically
A Make sure that the [Auto Image Density] key is selected. If it is not selected
press the [Auto Image Density] key.
Note
If the [Auto Image Density] key is not selected, press the [Auto Image Densi-
ty] key.
If you do not wish to set any other functions, press the {Start} key to
start copying.
To select image density manually
A Press the [Auto Image Density] key to deselect Auto Image Density.
B Press the [Lighter] or [Darker] key to adjust the image density.
Note
If you do not wish to set any other functions press the {Start} key to start
copying.
To combine Auto and Manual Image Density
A Make sure that the Auto Image Density is selected.
Basic Functions
2
35