Ricoh Aficio 1050 System Settings page 490

Copying
Auto Reduce/Enlarge
The machine can choose an appropriate reproduction ratio based on the paper
and original sizes you select.
2
Note
You can not set papers into the A3/11"
When you use Auto Reduce/Enlarge, refer to the following table for possible
original sizes and directions:
Metric version
Where Original Is Set
Exposure glass
Document feeder
*1
You can select from 8
tem Settings). See "Original: F/F4 Size Setting" in the System Settings manual.
Inch version
Where Original Is Set
Exposure glass
Document feeder
*1
You can select from 8
tem Settings). See "Original: F/F4 Size Setting" in the System Settings manual.
The machine can select a ratio in the range 25–400 %.
For some originals, the original size might not be detected correctly. See
P.16 "Sizes Difficult to Detect".
You can set originals of different sizes in the document feeder at the same
time. See
40
Original Size and Direction
A3 L, B4 L, A4 KL, B5 KL, 8
A3 L, B4 L, A4 KL, B5 KL, A5 KL, B6 KL, 11"
1
17" L, 8
1
/ " 13", 8
2
Original Size and Direction
17" L, 8
11"
A4 KL, 11" 17" L, 11"
11" KL, 5
1
/ " 13", 8
2
P.31 "Mixed Sizes Mode".
17" Tray Kit.
1
/ " 11" KL, 8 / "
2 2
1
/ " 13" and 8" 13" with the User Tools (Sys-
4
1 1
14" L, 8
/ " /
2
15"L, 8
1 1 1
" KL, 8
/ " 8 /
2 2
1
/ " 13" and 8" 13" with the User Tools (Sys-
4
1 *1
/ " 13" L
2
*1
13" L
11" KL
"
2
1 1
/ " 14" L, 8 /
2
*1
13" L
/ "
2
"
2