Clearing Misfeeds - Ricoh Aficio 1050 System Settings

x Clearing Misfeeds
R CAUTION:
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
Important
When clearing misfeeds, do not turn off the operation switch or your copy
settings will be cleared.
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
If paper misfeeds occur repeatedly, contact your service representative.
Note
More than one misfeed area may be indicated. In this case, check every appli-
cable area. Refer to the following charts: A, B, C, D, U, P, R (R1 – R6), Z
You can find a sticker explaining how to remove misfeed paper inside of the
front cover or inside of the finisher.
x Clearing Misfeeds
289
5