What to do if Something Goes Wrong
Machine Status
The [Connect] key does not
appear on the display.
5
The [Connect] key does not
appear on the display.
270
Cause
The master unit is in Preset
Jobs mode.
The "Connect Copy" of
User Tools setting is set to
"No".
The Connect Copy cable is
damaged.
L indicator is lit.
Action
Exit Preset Jobs mode in
one of the following ways.
If you are still selecting
copy settings and
copying has not started
yet :
Press the [Clear] key
then remove the origi-
nals set in the master
unit document feeder.
If Preset Jobs mode is
in progress :
Press the {Stop} key,
follow the instructions
on the display then
press the [Cancel] key.
Reference
See "Preset Jobs"
P.60 "Job Preset"
Change the setting to
"Yes" or press the [Con-
nect] key on the other unit.
Reference
See "Connect Copy"
P.269 "Connect Copy"
Please contact your service
representative.
Follow the instructions
shown on the display.