Staple Pitch Of Front 2 Positions Of 4 Position Staple - Konica Minolta bizhub 1250 User Manual

5
7
Check the staple pitch (a) of the sample.
8
Exit the print mode to return to the Staple Pitch Adjustment Screen.
% In bizhub PRESS 1250/1250P/1052, press [Close].
% In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit
PrintMode].
9
If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data.
% Adjustable range: -20 (narrow) to +20 (wide) (1 step = 1.0 mm)
% Use [+<->-] to specify the value to be positive or negative.
10
Press [Set] to change the current data.
11
Repeat the steps from 4 to 10 until the desired result is obtained.
12
Press [Return] to restore the Staple Pitch Adjustment Menu Screen.
5.4.2

Staple Pitch of Front 2 Positions of 4 Position Staple

Adjust the staple pitch of the front 2 positions of 4 position staples determined by Saddle Stitcher SD-513.
Objects of adjustment: Full Area (Offset for All Size), B4 w, 8K w, 11 e 17 w, A3 w, A3W w, B4W w,
11 e 17W w, Custom
NOTICE
With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific pa-
per size selected, set value will be the sum of the entered value and the value previously specified for [Full
Area] ([Offset for All Size]).
5-24
[Saddle Stitcher Adjustment] - [Staple Pitch Adjustment] 5.4
Saddle Stitcher SD-513