Konica Minolta bizhub 1250 User Manual page 88

4.9 Performing 2-Side Slitting on Fold & Stapled/Multi Half-Folded Paper
6
For "(1) Fore-edge Trimming", select [ON] or [OFF].
% If [Fold&Staple] was selected in Step 4, select [2 Positions] or [4 Positions] for "Staple", select
whether to enable [(1)Fore-edge Trimming].
% When [Multi Half] is selected in Step 4, select whether to enable [(1)Fore-edge Trimming].
% If the saddle stitcher is equipped with Creaser Unit CR-101, [Crease] is available. See page 4-36
for details.
% If the saddle stitcher is equipped with Folding Unit FD-504, [Spine Corner Forming] is available on
the Fold & Staple Setting Screen. See page 4-60 for details.
Saddle Stitcher SD-513
4
4-51