Konica Minolta bizhub 1250 User Manual page 89

4
7
For "(2)2-Side Slitting", press [ON].
The 2-Side Slitting Setting Screen will be displayed.
8
Specify 2-side slitting width.
Select [(1)] for "Slitting", and press the keypad, [,], or [+] to enter the slitting amount for the head. Like-
wise, press [(2)] and enter the slitting amount for the foot.
Press [Offset against Cover], and press the keypad, [,], or [+] to enter the slitting amount of body rel-
ative to cover within the range from -1.0 mm to +1.0 mm in increments of 0.1 mm.
% The difference of specified slitting between the head and the foot must not exceed 10.0 mm.
4-52
Performing 2-Side Slitting on Fold & Stapled/Multi Half-Folded Paper 4.9
Saddle Stitcher SD-513