Konica Minolta bizhub 1250 User Manual page 126

4.14 Functions of Printer Driver
Function Name
[Crease Position]
[Unit]
NOTICE
The number of creases is affected by the combined function.
When Fold & Staple or Multi Half Fold mode is selected, only a single crease can be specified for cover sheets.
Creases cannot be added on body.
When Tri Fold mode is selected, only two creases can be specified for tri-folded sheets.
When Perfect Bind mode is selected, 2 creases or 4 creases can be specified for cover sheets. Creases can-
not be added on body.
Saddle Stitcher SD-513
Option
7.0 to 251 (or 290) (mm)
-
Setting item
Specify the crease position.
Position (1) specifies the first crease
position.
Position (2) specifies the second
crease position.
This is available when [The Number
of Creases] is set to two or more
pieces.
Position (3) specifies the third crease
position.
This is available when [The Number
of Creases] is set to three or more
pieces.
Position (4) specifies the fourth
crease position.
This is available when [The Number
of Creases] is set to four pieces.
Specify the unit in millimeters or inch-
es.
4
4-89