Konica Minolta bizhub 1250 User Manual page 71

4
7
Specify the crease side.
Select [Front] or [Back] for "Crease Side".
8
Press [OK].
% To restore the previous setting, press [Cancel].
% To disable the function while keeping the current setting, press [Function OFF].
The Output Setting Screen will be restored.
9
Press [OK] on the Output Setting Screen to return to the Copy Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
10
Select additional copy conditions, as desired.
% In bizhub PRESS 1250/1250P/1052, you can load sheets onto a tray, and use [Paper Presetting] to
change the paper setting temporarily. See the User's Guide supplied with this machine for details
on [Paper Presetting].
11
Enter the desired print quantity from the control panel keypad.
12
Press Start on the control panel.
% If output sheets are creased at an invalid position, respecify the crease position on the Crease Set-
ting Screen in Step 6. For example, if you enter "210 mm", output sheets may be creased at the
position 211 mm due to paper stretching. In such a case, set to "209 mm".
4-34
Adding Fold Lines (Creases) on Paper
Saddle Stitcher SD-513
4.5