Konica Minolta bizhub 1250 User Manual page 164

5.8 [Saddle Stitcher Adjustment] - [Fold Paper Width Adjustment]
8
Exit the print mode to return to the Fold Paper Width Adjustment Screen.
% In bizhub PRESS 1250/1250P/1052, press [Close].
% In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit
PrintMode].
9
If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data.
% Adjustable range: -50 (narrow) to +50 (wide) (1 step = 0.1 mm)
% Use [+<->-] to specify the value to be positive or negative.
% If the setting data is too wide, misalignment may become worse.
10
Press [Set] to change the current data.
11
Repeat the steps from 4 to 10 until the desired result is obtained.
12
Press [Return] to restore the Saddle Stitcher Adjustment Menu Screen.
Saddle Stitcher SD-513
5
5-35