Konica Minolta bizhub 1250 User Manual page 61

4
5
For [(1)Fore-edge Trimming], select [ON] or [OFF].
% If [Fold&Staple] was selected in Step 4, select [2 Positions] or [4 Positions] for "Staple", then select
whether to enable [(1)Fore-edge Trimming].
% When [Multi Half] is selected in Step 4, select whether to enable [(1)Fore-edge Trimming].
% If the saddle stitcher is equipped with Creaser Unit CR-101, [Crease] is available. See page 4-30
for details.
% If the saddle stitcher is equipped with Trimmer Unit TU-503, [2-Side Slit] is available. See
page 4-45 for details.
% If the saddle stitcher is equipped with Folding Unit FD-504, [Spine Corner Forming] is available on
the Fold & Staple Setting Screen. See page 4-60 for details.
6
Press [OK].
% To restore the previous setting, press [Cancel].
% To disable the function while keeping the current setting, press [Function OFF].
The Output Setting Screen will be restored.
7
Press [OK] on the Output Setting Screen to return to the Copy Screen.
An icon representing specified output mode will be displayed under [Output Setting] on the Copy
Screen.
4-24
Making Folded Booklets: Fold & Staple/Multi Half-Fold 4.3
Saddle Stitcher SD-513