Konica Minolta bizhub 1250 User Manual page 104

4.12 Manually Using Folding Unit FD-503 or Saddle Stitcher SD-513
NOTICE
Set up the bundle exit tray extension of the saddle stitcher,
and open the stopper.
3
Press the Start/Stop button.
% To interrupt the operation, press the Start/Stop button again.
% If multi-feeding is detected and the machine stops even if a single sheet is fed, press the multi-feed
detection button to turn on the lower lamp.
NOTICE
The Finisher FS-532 trays have a limit in capacity. Be careful not to exceed the limit, otherwise unex-
pected trouble may be caused.
Saddle Stitcher SD-513
[1]: Start/Stop button
[1]: Multi-feed detection button
4
4-67