Konica Minolta bizhub 1250 User Manual page 57

4
Option
Spine Corner Forming +
2-Side Slitting + Fold &
Staple (+ Fore-edge
Trimming)
4-20
Additional Functions of Saddle Stitcher SD-513
Key Operation Description and Illustration
[Fold&Staple] Use Booklet as an application function in combina-
[Fold & Staple Set- tion, and form spine corners on fold & stapled sets.
ting] [Spine Corner For [Spine Corner Forming Strength], select
Forming] to be set to [Strong+], [Strong], [Normal], [Weak], or [Weak+].
[ON] Perform 2-side slitting on cover only, or slit entire
[Fold & Staple Set-
body. The slitting amount of body relative to cover
ting] can be specified within the range from -1.0 mm to
[(2)2-Side Slitting] to +1.0 mm in increments of 0.1 mm.
be set to [ON] Fore-edge trimming can be combined.
4.2
Saddle Stitcher SD-513