Henny Penny FlexFusion FGE 615 Service Instructions Manual page 54

Gas technology
Offset pressure overview
54
12.The indicator light in the "START STOP" button goes out; the
burner is off.
13.Switch off the unit.
14.Disconnect the pressure measuring device.
15.Screw the sealing plug tightly into the offset pressure measuring
nozzle.
16.On models with two burners: Repeat the procedure for the second
burner.
Output Range (mbar)
High -0.8 — 0
Low -0.4 — 0
Service instructions
Optimal (mbar)
-0.55
-0.15