Adjusting The Winding Tension - DURKOPP ADLER 512-211-01 Service Instructions Manual

Adjusting the winder
5. Move the thread guide plate (3):
6. Tighten the adjusting screw (1).

10.2 Adjusting the winding tension

Correct setting
The correct winding tension depends on the anti-friction properties and
thickness of the thread.
Faults caused by an incorrect setting
• Wrinkled seams
• Poor sewing results
Fig. 26: Adjusting the winding tension
(1) - Adjusting knob
Adjusting steps
1. Turn the adjusting knob (2):
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
• Smaller fill quantity: Push towards bobbin.
• Larger fill quantity: Push away from bobbin.
• Greater tension: Turn clockwise
• Less tension: Turn counterclockwise
①
35