Removing And Fitting The Arm Cover; Removing And Fitting The Right-Hand Side Cover - DURKOPP ADLER 512-211-01 Service Instructions Manual

3.3.3 Removing and fitting the arm cover

Fig. 3: Removing and fitting the arm cover
(1) - Screw
Removing the arm cover
1. Loosen all 6 screws (1).
2. Remove the arm cover (2).
Fitting the arm cover
1. Fit the arm cover (2).
2. Tighten all 6 screws (1) firmly in place.

3.3.4 Removing and fitting the right-hand side cover

Fig. 4: Removing and fitting the right-hand side cover
(1) - Screw
14
①
②
①
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
Work principles
(2) - Arm cover
②
(2) - Right-hand side cover