Removing And Fitting The Arm Cover - DURKOPP ADLER H-Type 969 Service Instructions Manual

Basic Principles of Working with the Machine

3.3.2 Removing and fitting the arm cover

If necessary, each of the two top covers can be removed separately.
Fig. 2: Removing and fitting the arm cover
①
②
③
④
(1) - Right adjusting wheel
(2) - Left adjusting wheel
(3) - Screws
(4) - Upper left cover
Removing the left arm cover
1. Turn left adjusting wheel (2) to position 0.
2. Turn right adjusting wheel (1) to position 8.
3. Loosen the screws (3).
4. Lift the upper left cover (4) up in the direction of the arrow.
Removing the right arm cover
1. Turn the lever (7) clockwise as far as it will go.
2. Loosen the screws (6).
3. Raise the cover and disconnect the power plug for the fan that is attached
4. Lift the upper right cover (5) up in the direction of the arrow.
Service Instructions 969 - 01.0 - 12/2015
The cover cannot be removed unless the adjusting wheels are set to
the proper position.
to the underside of the cover.
⑦
⑥
⑤
(5) - Upper right cover
(6) - Screws
(7) - Lever
11