Maximum Speed - Siemens SINAMICS G120 Original Instructions Manual

Setting functions
8.4 Setpoint calculation
8.4.5

Maximum speed

The maximum speed limits the speed
setpoint range for both directions of
rotation.
The inverter generates a message
(fault or alarm) when the maximum
speed is exceeded.
If you must limit the speed depending on the direction of rotation, then you can define speed
limits for each direction.
Table 8- 18
Parameter
p1082
p1083
p1086
246
Parameters for minimum and maximum speed
Description
Maximum speed (factory setting: 1500 rpm)
Speed limit, positive direction of rotation (factory setting: 210,000 rpm)
Speed limit, negative direction of rotation (factory setting: -210,000 rpm)
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG