Call The Starter And Go Online - Siemens SINAMICS G120 Original Instructions Manual

Appendix
A.7 Application examples
A.7.2.3

Call the STARTER and go online

Procedure
To call STARTER from STEP 7 and establish an online connection to the inverter, proceed
as follows:
1. Highlight the inverter in the SIMATIC manager with the right mouse button.
2. Open the STARTER via "Open object".
3. Configure the inverter in STARTER and click on the Online button (
4. In the following window, select the inverter and then the S7ONLINE as access point.
5. Exit the screen form with OK.
You have called STARTER from STEP 7, and have established the online connection to the
inverter.
436
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
).