Technical Data, Power Modules - Siemens SINAMICS G120 Original Instructions Manual
Sinamics g120 inverter with cu230p-2 control
units
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
12.2
Technical data, Power Modules
Definitions
• LO input current
• LO output current
• LO power
• HO input current
• HO output current
• HO power
If the power data comprises rated values without any further specifications they always refer
to an overload capability corresponding to Low Overload.
Note
The base load (100% power or current) of "Low Overload" is greater than the base load of
"High Overload".
We recommend the "SIZER" engineering software to select the inverter based on duty
cycles. See Manuals for your inverter (Page 446).
Inverter with CU230P-2 Control Units
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
100% of the permissible input current for a load cycle according to
Low Overload (LO base load input current).
100% of the permissible output current for a load cycle according
to Low Overload (LO base load output current).
Power of the inverter for LO output current.
100% of the permissible input current for a load cycle according to
High Overload (HO base load input current).
100% of the permissible output current for a load cycle according
to High Overload (HO base load output current).
Power of the inverter for HO output current.
Technical data
12.2 Technical data, Power Modules
375
Advertisement
Table of Contents
