109: Print Ribbon Problem; 110: Print Ribbon Out Or Missing; 111: Card Not Picked - DataCard CE870 User Manual

109: Print ribbon problem

The print ribbon is not moving properly.
1.
Open the printer and remove the ribbon cartridge.
2.
Reposition, repair, or replace the ribbon and advance the repaired area one full turn.
3.
Replace the ribbon cartridge and close the printer.
Press the U
SER
H & T
INTS IPS
Remove any debris from the print area.

If a card is in the printer, turn the manual advance knob to move the card so that the printer

can eject it.

110: Print ribbon out or missing

The printer does not have usable ribbon. To complete the current card:
1.
Open the printer and remove the ribbon cartridge.
2.
Install a new ribbon and cleaning roller.
3.
Replace the cartridge and close the printer
Press the U
SER
H & T
INTS IPS
Used ribbon has negative images of printed data. To keep the data confidential, follow your
company policy to discard used ribbon.

111: Card not picked

The printer did not pick a card. To complete the current card:
For printers with an input hopper, open the input hopper, add or reposition cards, and close the
hopper.
For printers with single card feed, push the card in until the printer picks it.
Press the U
SER
70
button on the printer to clear the message and send a new card to the printer.
button on the printer to clear the message.
button on the printer to clear the message.
Troubleshooting