Table of Contents
Advertisement
2
Slide the yellow sliders on the top and bottom of the Units until they click into place, firmly lock-
ing the Units together.
3
Attach an End Plate to the Unit on the right end of the Rack.
Precautions for Safe Use
The Units may not function properly if the sliders are not locked into place.
Always connect the End Plate to the rightmost Unit. The NJ-series PLC will not function properly
without the End Plate connected. The End Plate is provided with the CPU Unit.
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
2 Components, Installation and Wiring
Slide the sliders toward the back
until they click into place.
Slider
Lock
Release
2
2-7
Advertisement
Table of Contents
