Omron CJ1W-CT021 Operation Manuals page 137

For inputs
Name of device variable
for CJ-series Unit
*_OutStaDat
*_OutSta0
*_OutSta1
*_OutSta2
*_OutSta31
*_In0
*_In1
*_ErrCode1
*_ErrCode2
*_GlblErr
*_UnitInitSta
*_IABlkOverlapSta
*_Ch1_RngCmpDatSta
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
Type R/W Name
DWORD R Output Status
BOOL R Digital Output 0 Status 1: ON, 0: OFF
BOOL R Digital Output 1 Status 1: ON, 0: OFF
BOOL R Soft Output 2 Status
BOOL R Soft Output 31 Status
BOOL R Digital Input 0 Status
BOOL R Digital Input 1 Status
WORD R Error Code 1
WORD R Error Code 2
BOOL R Global Error
BOOL R Unit Busy
BOOL R
IA Blocks overlap
Counter 1
DWORD R Ranges / Comparison
Values active*1
4 Exchanging Data with CPU
General
The current statuses of external and internal output
(total of 32) are all displayed.
0: OFF
1: ON
Bit 00: External output O0
Bit 01: External output O1
Bit 02: Internal output 2
-
Bit 31: Internal output 31
This variable is used to process output signal sta-
tuses collectively.
Data range: 16#00000000 to 16#FFFFFFFF
1: ON, 0: OFF
~~
1: ON, 0: OFF
The Digital Input 0 (I0) status is displayed.
1: ON, 0: OFF
The Digital Input 0 (I1) status is displayed.
1: ON, 0: OFF
For details, refer to 5-2 Error codes.
Data range: 16#0000 to 16#FFFF
For details, refer to 5-2 Error codes.
Data range: 16#0000 to 16#FFFF
1: Shows that one or more error has occurred.
These error codes are stored in the error list in this
unit.
0: Normal
1: Unit initialization processing underway
0: Other than the above
*2 1: Shows that range/comparison data is duplicated
in the CPU Unit I/O memory.
0: Other than the above
Shows the current status of all the comparison con-
ditions.
Bits 00 to 31 correspond to comparison conditions
0 to 31.
Each bit shows 1 if the condition is met, or 0 if the
condition is not met.
Data range: 16#00000000 to 16#FFFFFFFF
Function
*3
4-13
4