Table of Contents
Advertisement
1 Introduction
Details of Hardware Setting and Rack Assembly
Set the Unit number
Set the Machine Number. Refer to 2-1-4 Machine Number Switch for further details.
Set the same unit number as in the Unit Configuration settings.
Set the types of Counters
Set the Counter Type for every Counter with the switch at the front of the Unit. Pins 1 and 2 corre-
spond to Counters 1 and 2.
Refer to 2-1-3 Counter Type Switch for further details.
Mounting and wiring to the Rack
Install and wire the Unit. Refer to 2-2 Installation and 2-3 Wiring for further details.
1-20
Machine Number Switch:
MACH
No.
×
1
10
×
0
10
Set between 00 - 92
Counter Type Switch:
ON
OFF
OFF = Simple Counter
ON = Circular/Linear Counter
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
Advertisement
Table of Contents
