Table of Contents
Advertisement
3 Operation and Configuration
3-7
Extra Functions
3-7-1
Programmable Output Pulses
Depending on the requirements of your application, the timing characteristics of the two Digital Outputs
of the High-speed Counter Unit can be modified. The Unit can be either in Range Mode or in Compari-
son Mode. The following functionality can be assigned to the Digital Outputs:
• Normal Functionality (= default)
• Output Turn ON Delay [1 ms to 9999 ms], to delay turning ON an Output
• Output Pulse Duration [1 ms to 9999 ms], to generate an Output pulse of a specified duration
• Combination of Output Turn ON Delay + Output Pulse Duration
The corresponding action is triggered by a rising edge of the Output (0-1) of the Unit Output Pattern and
consequently applied to the corresponding Digital Output.
Unit Output Pattern:
Rising edge Output (0-1)
Corresponding Digital Output (0-1):
Normal Functionality
Output Pulse ON-Delay
Output Pulse Duration
Output Pulse
ON-Delay and Duration
Normal Functionality
A Digital Output that is configured to have Normal Functionality will turn ON immediately after the
corresponding bit of the Unit Output Pattern turns ON.
Output Pulse ON-Delay
A Digital Output that is configured to have an Output Pulse ON-Delay will turn ON after the ON-
Delay has elapsed.
3-40
31
31 30 29
ON-Delay
Pulse Duration
ON-Delay
Pulse Duration
CJ-series High-speed Counter Units Operation Manual for NJ-series CPU Unit(W492)
16 15 14
6
5
ON-Delay
Pulse Duration
ON-Delay
Pulse Duration
4
3
2
1
0
4
3
2 O1 O0
Reset ON-Delay
ON-Delay
Pulse Duration
Reset ON-Delay
ON-Delay
time
Advertisement
Table of Contents
